Hasleo Software Forums

Full Version: Wintousb 3.4 skip partitioning scheme option
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I have a Samsung Portable SSD T3 250GB, and having issue when trying to install Windows 10 on it from a Windows ISO.

My current OS is Windows 10.
The version of WinToUSB is: 3.4

This is the instructions I am trying to follow:
http://www.easyuefi.com/wintousb/faq/en_US/How-to-create-bootable-Windows-installation-USB.html

In step 7 it said:
"After you select the USB drive, a pop-up will appear asking you if you want to format it to continue, tick the "MBR for BIOS and UEFI" checkbox, then click "Yes"."


But I don't see the "partitioning scheme option" pop-up:

[Image: installation-need-format-usb.png]

Instead it skip to step 9:

(The below image is from the original instructions, the image I see is without the little boot partitions on the right.)
[Image: installation-select-partition.png]

Even the installation was successful but without create any boot partition.

Thanks! Smile
(02-02-2017, 03:50 PM)bbyunzone Wrote: [ -> ]I have a Samsung Portable SSD T3 250GB, and having issue when trying to install Windows 10 on it from a Windows ISO.

My current OS is Windows 10.
The version of WinToUSB is: 3.4

This is the instructions I am trying to follow:
http://www.easyuefi.com/wintousb/faq/en_US/How-to-create-bootable-Windows-installation-USB.html

In step 7 it said:
"After you select the USB drive, a pop-up will appear asking you if you want to format it to continue, tick the "MBR for BIOS and UEFI" checkbox, then click "Yes"."


But I don't see the "partitioning scheme option" pop-up:

[Image: installation-need-format-usb.png]

Instead it skip to step 9:

(The below image is from the original instructions, the image I see is without the little boot partitions on the right.)
[Image: installation-select-partition.png]

Even the installation was successful but without create any boot partition.

Thanks! Smile

The "partitioning scheme option" pop-up windows will only appear when using a USB flash drive to create Windows To Go, it will not appear when using an external hard drive to create portable Windows. So if you are using an external hard drive to create Windows To Go, You need to manually create the required partitions. Please follow the guide below to create Windows To Go from an Windows ISO file:
http://www.easyuefi.com/wintousb/faq/en_US/How-to-use-WinToUSB-ISO-To-USB.html
dobry den, mam ex hdd 1T. mel jsem temer plny. windows7 se my povedlo naistalovat. pri zpusteni notebooku mam na vyber ze 2 stejnych windowsu. moje otazka je, ale opacna. poradte my nekdo jak dostanu zpet data co byly na ex hdd. pochopil jsem ,ze se naformatoval pri instalaci. ale napr. kdyz preintaluji win. tak se my stary zabali do windows.exe... ale na ex hdd my to prijde jako bitova kopie (stejny obrazek na pozadi, ve slozce stazene soubory je to stejne. ja jsem vzdy kdyz jsem stahl film, tak ho presunul na ex hdd. ted mam 2x stejny win. ale zadny film... dekuji za jakoukoli opoved. zkousel jsem recuva a nic
(02-09-2017, 11:53 AM)Pavel23 Wrote: [ -> ]dobry den, mam ex hdd 1T. mel jsem temer plny. windows7 se my povedlo naistalovat. pri zpusteni notebooku mam na vyber ze 2 stejnych windowsu. moje otazka je, ale opacna. poradte my nekdo jak dostanu zpet data co byly na ex hdd. pochopil jsem ,ze se naformatoval pri instalaci. ale napr. kdyz preintaluji win. tak se my stary zabali do windows.exe... ale na ex hdd my to prijde jako bitova kopie (stejny obrazek na pozadi, ve slozce stazene soubory je to stejne. ja jsem vzdy kdyz jsem stahl film, tak ho presunul na ex hdd. ted mam 2x stejny win. ale zadny film... dekuji za jakoukoli opoved. zkousel jsem recuva a nic

I'm sorry, I don't quite understand what you are meaning. Could you speak english?
Thanks for the help, with a little bit of effort to follow the instructions you provided, I was able to complete it. 
(02-13-2017, 10:26 AM)bbyunzone Wrote: [ -> ]Thanks for the help, with a little bit of effort to follow the instructions you provided, I was able to complete it. 

I'm only too pleased to be able to help you and thank you for you interest in our product(s).