Forums
Operation failed. (0x00000000200AE0000) - Printable Version

+- Forums (http://www.easyuefi.com/forums)
+-- Forum: The EasyUEFI Development Team (http://www.easyuefi.com/forums/forumdisplay.php?fid=1)
+--- Forum: WinToUSB (http://www.easyuefi.com/forums/forumdisplay.php?fid=2)
+--- Thread: Operation failed. (0x00000000200AE0000) (/showthread.php?tid=134)



Operation failed. (0x00000000200AE0000) - bludevil - 05-16-2015

Apologies in advance if this has been addressed already but I did search and didnt see any relevant posts.

I am attempting to clone my existing windows 7 enterprise install to an external USB drive and it repeatedly fails [System Clone was not successfull] with the above error.

I was able to open a command prompt and verify that both disks are visible [diskpart; list disk]

I noticed after each failed attempt, the destination disk ends up in "unallocated" [partitions wiped out] state and the tool wouldnt accept a blank/unformatted destination disk.

Any help would be greatly appreciated.


RE: Operation failed. (0x00000000200AE0000) - admin - 05-17-2015

(05-16-2015, 10:44 AM)bludevil Wrote: Apologies in advance if this has been addressed already but I did search and didnt see any relevant posts.

I am attempting to clone my existing windows 7 enterprise install to an external USB drive and it repeatedly fails [System Clone was not successfull]  with the above error.

I was able to open a command prompt and verify that both disks are visible [diskpart; list disk]

I noticed after each failed attempt, the destination disk ends up in "unallocated" [partitions wiped out] state and the tool wouldnt accept a blank/unformatted destination disk.

Any help would be greatly appreciated.

Can you try it again?


RE: Operation failed. (0x00000000200AE0000) - bludevil - 05-17-2015

(05-17-2015, 12:13 AM)admin Wrote: Can you try it again?

I have tried several times without luck including uninstalling and re-installing the tool - please let me know if there is anything else to try.


RE: Operation failed. (0x00000000200AE0000) - bludevil - 05-18-2015

Trying a patch I just got will post results

I am afraid the patch didnt work - I am unable to attach the user.log here - here is a paste:

Code:
2015-05-17 13:51:46 T:00000120 WinToUSB Version:2.1.2.0
2015-05-17 13:51:46 T:00000120 .\main.cpp main 128 Start...
2015-05-17 13:52:17 T:00000120 .\DiskPartManager.cpp 209 ====================ALL Disks:====================
2015-05-17 13:52:17 T:00000120 .\DiskIOWin32.cpp 61 nRet=0x00020066003C0000 \\.\PhysicalDrive2
2015-05-17 13:52:17 T:00000120 .\DiskTypeWin32.cpp 47 nRet=0x00020066003C0000 \\.\PhysicalDrive2
2015-05-17 13:52:17 T:00000120 .\DiskIOWin32.cpp 61 nRet=0x00020066003C0000 \\.\PhysicalDrive3
2015-05-17 13:52:17 T:00000120 .\DiskTypeWin32.cpp 47 nRet=0x00020066003C0000 \\.\PhysicalDrive3
2015-05-17 13:52:17 T:00000120 .\DiskIOWin32.cpp 61 nRet=0x00020066003C0000 \\.\PhysicalDrive4
2015-05-17 13:52:17 T:00000120 .\DiskTypeWin32.cpp 47 nRet=0x00020066003C0000 \\.\PhysicalDrive4
2015-05-17 13:52:17 T:00000120 .\DiskIOWin32.cpp 61 nRet=0x00020066003C0000 \\.\PhysicalDrive5
2015-05-17 13:52:17 T:00000120 .\DiskTypeWin32.cpp 47 nRet=0x00020066003C0000 \\.\PhysicalDrive5
2015-05-17 13:52:17 T:00000120 .\DiskIOWin32.cpp 61 nRet=0x00020066003C0000 \\.\PhysicalDrive6
2015-05-17 13:52:17 T:00000120 .\DiskTypeWin32.cpp 47 nRet=0x00020066003C0000 \\.\PhysicalDrive6
2015-05-17 13:52:17 T:00000120 .\DiskIOWin32.cpp 61 nRet=0x00020066003C0000 \\.\PhysicalDrive7
2015-05-17 13:52:17 T:00000120 .\DiskTypeWin32.cpp 47 nRet=0x00020066003C0000 \\.\PhysicalDrive7
2015-05-17 13:52:17 T:00000120 .\DiskIOWin32.cpp 61 nRet=0x00020066003C0000 \\.\PhysicalDrive8
2015-05-17 13:52:17 T:00000120 .\DiskTypeWin32.cpp 47 nRet=0x00020066003C0000 \\.\PhysicalDrive8
2015-05-17 13:52:17 T:00000120 .\DiskIOWin32.cpp 61 nRet=0x00020066003C0000 \\.\PhysicalDrive9
2015-05-17 13:52:17 T:00000120 .\DiskTypeWin32.cpp 47 nRet=0x00020066003C0000 \\.\PhysicalDrive9
2015-05-17 13:52:17 T:00000120 .\DiskIOWin32.cpp 61 nRet=0x00020066003C0000 \\.\PhysicalDrive10
2015-05-17 13:52:17 T:00000120 .\DiskTypeWin32.cpp 47 nRet=0x00020066003C0000 \\.\PhysicalDrive10
2015-05-17 13:52:17 T:00000120 .\DiskIOWin32.cpp 61 nRet=0x00020066003C0000 \\.\PhysicalDrive11
2015-05-17 13:52:17 T:00000120 .\DiskTypeWin32.cpp 47 nRet=0x00020066003C0000 \\.\PhysicalDrive11
2015-05-17 13:52:17 T:00000120 .\DiskIOWin32.cpp 61 nRet=0x00020066003C0000 \\.\PhysicalDrive12
2015-05-17 13:52:17 T:00000120 .\DiskTypeWin32.cpp 47 nRet=0x00020066003C0000 \\.\PhysicalDrive12
2015-05-17 13:52:17 T:00000120 .\DiskIOWin32.cpp 61 nRet=0x00020066003C0000 \\.\PhysicalDrive13
2015-05-17 13:52:17 T:00000120 .\DiskTypeWin32.cpp 47 nRet=0x00020066003C0000 \\.\PhysicalDrive13
2015-05-17 13:52:17 T:00000120 .\DiskIOWin32.cpp 61 nRet=0x00020066003C0000 \\.\PhysicalDrive14
2015-05-17 13:52:17 T:00000120 .\DiskTypeWin32.cpp 47 nRet=0x00020066003C0000 \\.\PhysicalDrive14
2015-05-17 13:52:17 T:00000120 .\DiskIOWin32.cpp 61 nRet=0x00020066003C0000 \\.\PhysicalDrive15
2015-05-17 13:52:17 T:00000120 .\DiskTypeWin32.cpp 47 nRet=0x00020066003C0000 \\.\PhysicalDrive15
2015-05-17 13:52:17 T:00000120   .\DiskPartManager.cpp 128 DiskNumber:0 DiskType:3 CHS:19457*255*63 SectorSize:512 Sectors:312576705
Readonly:0 Removable:0 USB:0
2015-05-17 13:52:17 T:00000120   .\DiskPartManager.cpp 128 DiskNumber:1 DiskType:3 CHS:60801*255*63 SectorSize:512 Sectors:976768065
Readonly:0 Removable:0 USB:1
2015-05-17 13:52:17 T:00000120 .\DiskPartManager.cpp 222 ====================USB Disks:====================
2015-05-17 13:52:17 T:00000120   .\DiskPartManager.cpp 235 DiskNumber:0 DiskType:3 CHS:19457*255*63 SectorSize:512 Sectors:312576705
Readonly:0 Removable:0 USB:0
2015-05-17 13:52:17 T:00000120   .\DiskPartManager.cpp 235 DiskNumber:1 DiskType:3 CHS:60801*255*63 SectorSize:512 Sectors:976768065
Readonly:0 Removable:0 USB:1
2015-05-17 13:52:18 T:00000170 .\DisableAutoPlay.cpp 17 dwErrNo=0x00000002
2015-05-17 13:52:23 T:00000170 .\CloneBootPart.cpp 175 nRet=0x0000000200AE0000 0 0x800 1 0x800 0x3A384800 8
2015-05-17 13:52:23 T:00000170 .\SystemClone.cpp 551 nRet=0x0000000200AE0000
2015-05-17 13:52:23 T:00000170 .\SystemClone.cpp 350 nRet=0x0000000200AE0000
2015-05-17 13:52:23 T:00000170 .\DisableAutoPlay.cpp 59 dwErrNo=0x00000006
2015-05-17 13:52:23 T:00000170 .\CloneMainWnd.cpp 354 nRet=0x0000000200AE0000



RE: Operation failed. (0x00000000200AE0000) - admin - 05-19-2015

Please run chkdsk to scan the source boot partition and see if it have file system errors. If Yes, fix it and try again.


RE: Operation failed. (0x00000000200AE0000) - bludevil - 05-20-2015

I am afraid "chkdsk" of the source disk didnt help - is there another method to clone my existing installation to the external disk and make it bootable?

And, one other suggestion/request - can you make the tool/WinToUSB be restartable from the command prompt or the UI? Thanks


RE: Operation failed. (0x00000000200AE0000) - admin - 05-20-2015

(05-20-2015, 02:03 AM)bludevil Wrote: I am afraid "chkdsk" of the source disk didnt help - is there another method to clone my existing installation to the external disk and make it bootable?

And, one other suggestion/request - can you make the tool/WinToUSB be restartable from the command prompt or the UI? Thanks

There are bad sectors on the source boot partition, WinToUSB doesn't support it yet. Please wait for the next version of WinToUSB, we will try to fix it.
What is restartable mean?