+- Hasleo Software Forums (https://www.easyuefi.com/forums)
+-- Forum: Hasleo Software (formerly called EasyUEFI Development Team) (https://www.easyuefi.com/forums/forumdisplay.php?fid=1)
+--- Forum: WinToUSB (Best Windows To Go Creator) (https://www.easyuefi.com/forums/forumdisplay.php?fid=2)
+--- Thread: Sector size not supported. (0x057800C103900000) (/showthread.php?tid=24)
Sector size not supported. (0x057800C103900000) - palmer - 07-27-2014
I'm trying to install Windows 8.1 Pro to a USB hard disk and I get the following error message when selecting the disk in WinToUSB:
Sector size not supported. (0x057800C103900000)
Here is my user.log: http://pastebin.com/03FP7X4Z
RE: Sector size not supported. (0x057800C103900000) - admin - 07-27-2014
WinToUSB only supports USB disk devices with a sector size of 512 bytes, but your USB hard disk has a sector size of 4096 bytes, please try another USB drive.
RE: Sector size not supported. (0x057800C103900000) - emre86 - 03-29-2015
(07-27-2014, 11:45 PM)admin Wrote: WinToUSB only supports USB disk devices with a sector size of 512 bytes, but your USB hard disk has a sector size of 4096 bytes, please try another USB drive.
I have the same problem. I have a 3TB USB HDD. My USB HDD's minimum sector size for NTFS is 4096 bytes. I can't reduce from 4096 bytes to 512 bytes. Could you add 4096 bytes support for WinToUSB software, please. This issue is an important issue.
RE: Sector size not supported. (0x057800C103900000) - admin - 03-31-2015
Thank you for your advice, I will do it.
RE: Sector size not supported. (0x057800C103900000) - dale - 06-15-2016
(03-31-2015, 10:10 PM)admin Wrote: Thank you for your advice, I will do it.
I'm getting an error message, "Sector size not supported. (0x000000C106560000). Is this a 4096 size sector or some other size? Has the software been modified to work with 4096 sectors?
RE: Sector size not supported. (0x057800C103900000) - admin - 06-15-2016
(06-15-2016, 03:41 AM)dale Wrote:(03-31-2015, 10:10 PM)admin Wrote: Thank you for your advice, I will do it.
I'm getting an error message, "Sector size not supported. (0x000000C106560000). Is this a 4096 size sector or some other size? Has the software been modified to work with 4096 sectors?
Yes, it is a 4K size sector USB drive and WinToUSB doesn't yet support it, so please try another USB drive.