Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
inaccessible boot device error
#1
Hi, thanks for the great software !

I have a specific problem, my laptops default sata harddisk cable is damaged when i tried to replace it with an ssd.

So i removed the cable and decided to buy a dvd-bay to hdd-ssd adapter and run windows from my dvd-bay, but windows was unable to install from dvd-bay and gave error on the setup page. But Ubuntu installation worked fine, so i'm thinking its not a hardware related problem.

But i needed windows and decided to use wintousb with my sandisk cz80 and have been using since, but now i saw that wintohdd is out i installed it.

The problem i'm having is, my wintousb doesn't boot when there is a ssd in the dvd-bay, and it is the only operating system to run wintohdd.

So i unmounted my ssd and put it in a usb enclosure, then run wintohdd and installed the windows 10 to the ssd succesfully.

Then i boot the usb-ssd and finished the installation. After installation is completely finished and i'm on windows desktop, i shut down the pc and take the ssd from usb enclosure and put it back to dvd-bay, hoping that it may work.

Once i booted i get this error when loading with windows logo

"inaccessible boot device error"

i searched internet and it might be "mbr" related, is there anything i can do to solve this problem ?

Thanks again for this great software!!
Reply
#2
The INACCESSIBLE_BOOT_DEVICE error indicates that the Windows is unable to access the boot disk during startup. More infomation about INACCESSIBLE_BOOT_DEVICE error, please visit:
https://msdn.microsoft.com/en-us/library...85%29.aspx

I think you should contact your hardware manufacturer for support.
Reply
#3
Background:

Windows 7 Pro

Free upgrade to Windows 10 Pro

A couple of months pass

The computer crashes and I can't reboot

I have a Retrospect Backup



When I try to restore my backup, all goes well but when I try to boot I get "Inaccessible Boot Device"



I can reinstall Windows 10 Pro and the computer boots just fine, but if I do a Retrospect restore I get: "Inaccessible Boot Device.  I have tried it directly from a rescue disk - the same thing.



Note: I also have an image backup (Macrium Reflect).  Same thing I get:  "Inaccessible Boot Device"



I would appreciate any suggestions.
Reply
#4
(07-18-2021, 06:09 AM)triley Wrote: Background:

Windows 7 Pro

Free upgrade to Windows 10 Pro

A couple of months pass

The computer crashes and I can't reboot

I have a Retrospect Backup



When I try to restore my backup, all goes well but when I try to boot I get "Inaccessible Boot Device"



I can reinstall Windows 10 Pro and the computer boots just fine, but if I do a Retrospect restore I get: "Inaccessible Boot Device.  I have tried it directly from a rescue disk - the same thing.



Note: I also have an image backup (Macrium Reflect).  Same thing I get:  "Inaccessible Boot Device"



I would appreciate any suggestions.

In your case, we recommend that you contact your backup software provider for a solution.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)