07-23-2021, 04:37 AM
Hello, I start from Emergency USB Stick with Software Version 1.8 (Build 26 jun 2021).
make a backup from Disk C and the system partions. After the job the log says all files are ok.
shutdown the computer.
so i want to test a restore.
start with the same usb stick. -> go to restore -> select browse image ... -> select the image file on my separate usb disk ->
select the box (disk 1 basic GPT, 58,25GB) and all is fine -> next Window mark the DISK 1 and mark the box with keep partion layout -> here default -> and start the proceed.
The job ended correctly with no error and shutdown.
The USB Stick and USB Disk put outside and then starts the notebook.
But no Windows 10 starts. only a message on screen "NO system found RESTARTS now"
So I change the Disk, but it´s every the same: eMMC alone build in notebook or WD SATA.
Every time the same result.
Notebook Medion MD62100, 4GB Ram, 60GB intern eMMC (DISK1) and WD SATA3 250GB (DISK0)
Thanks for help
make a backup from Disk C and the system partions. After the job the log says all files are ok.
shutdown the computer.
so i want to test a restore.
start with the same usb stick. -> go to restore -> select browse image ... -> select the image file on my separate usb disk ->
select the box (disk 1 basic GPT, 58,25GB) and all is fine -> next Window mark the DISK 1 and mark the box with keep partion layout -> here default -> and start the proceed.
The job ended correctly with no error and shutdown.
The USB Stick and USB Disk put outside and then starts the notebook.
But no Windows 10 starts. only a message on screen "NO system found RESTARTS now"
So I change the Disk, but it´s every the same: eMMC alone build in notebook or WD SATA.
Every time the same result.
Notebook Medion MD62100, 4GB Ram, 60GB intern eMMC (DISK1) and WD SATA3 250GB (DISK0)
Thanks for help