02-21-2018, 11:23 PM
(02-20-2018, 06:24 PM)pururin Wrote:(02-20-2018, 04:51 PM)admin Wrote: Please go to the bin folder under the installation directory of WinToUSB, open "WinToUSB.ini", change "MinimumVHDSize" from 14 to a smaller value, then restart WinToUSB and try again. The MinimumVHDSize parameter is the minimum disk size supported by WinToUSB.
Did not succeed, when I select my USB Drive in "Please select the destination disk:" page
It's still error with message "Disk or partition space is insufficient.(0x000000C206270000)"
Could you tell us which feature you are using to create Windows To Go? 'ISO/CDROM to USB' or 'Physical To USB'?
If you are using 'Physical To USB', WinToUSB will copy all the files in source boot partition (Usually C: ) to the destination USB drive, so the destination USB drive must be larger than the used space on source boot partition, and WinToUSB requires that the destination boot partition must be 20% larger than the used space on source boot partition. In such case, you need a larger USB drive.
The price of a USB flash drive is very cheap and you should buy a larger drive.