Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Residual HBS Systray Icon (after sleep)
#21
(11-19-2026, 08:43 AM)admin Wrote:
(11-15-2026, 02:14 PM)jordanac265 Wrote: I need to follow-up with the above test-version.  I've discovered on both PC's. if the "Settings > Delay time before power management action..." is anything above zero, when the PC's are woken from the sleep-state next morning, they automatically go back to sleep after the number of seconds applied in the box.  It only occurs once after the nightly backup and wake sequence.  If the seconds is set to zero, then the one-time "re-sleep" after being woken, does not occur.  I hope I was able to explain this observation well enough.

Regards,

We've tried to reproduce the issue on our side but haven't been able to so far. One thing we'd like to rule out: could you check whether you have power management options configured for multiple tasks? If several scheduled jobs each have their own power plan/delay settings, it's possible they're interacting in a way that causes the one-time re-sleep after wake.

Could you let us know:
  1. How many scheduled tasks you have, and whether more than one of them has a power management action (sleep/hibernate/shutdown) configured?
  2. Whether the delay value is set the same across all of those tasks, or differently?
  3. If you temporarily disable all but one task, does the re-sleep behavior still occur?

And please check if the computer was properly woken up at the scheduled time to perform the backup task.

This will help us narrow down whether it's a multi-task interaction or something else.

Thanks.

Hello,
Hopefully the following will answer your questions.  I would like to reiterate - this "re-sleep" observation after the PC is woken the next morning, was not observed on any previous HBS 5.x or 6.x version.  It has only been since installing and using the above "test 6.0.2.0" version attached to this thread, a couple of posts back.  This observation is observed on both Win11 Pro PC's, one is an older Intel-i9 11000K and the other is a newer AMD-9800x3d, hand-built by me over the past few years.  I am a local-admin login on both PC's, no MS account is used on either Windows login - yes, I'm old-school, LOL...   Wink

Both PC's have identical tasks setup, which have been in-use for many years, including on a competitor software, HBS 5.x and HBS 6.x.  One is a files-backup task, and one is an image-backup task.  Both tasks on both PC's put the respective PC back to sleep when the job completes (when run by schedule).  According to the Windows Event and HBS logs, the PCs are waking and going back to sleep (S3 state) as expected - that's never been a noted issue.  The re-sleep after waking, occurs if either the files or image backup task runs, AND the HBS Settings "Delay Time Before Power Management" is set to any value above zero (seconds).

The highest priority backup actually runs on a given night/week (full, diff, inc). 
  • The files-backup task runs nightly at 12:05am, with a full backup on the 1st Saturday of the month, a differential backup every Saturday, and an incremental backup every night.  Retention on the target NAS is 3 monthly sets.  These sets are cloud-synced offsite for major disaster protection; included with my NAS offsite protection.
  • The image-backup tasks run weekly 12:55am, with a full backup on the 1st Saturday of the month, and an incremental image backup every Saturday.  12 monthly backup sets are retained on the NAS

So, as you can see, the files-backup running nightly, without the image-backup except on Saturdays, indicates that a single task still causes the re-sleep observation.  When waking the PC on Saturday mornings, only one re-sleep event was experienced, not two.

I do hope this helps.  It's been nice not having to clear the HBS icon in the systray the next morning, using this version.   Big Grin   Again, putting the HBS Settings delay option to zero (seconds) does provide a work-around.

Regards,
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)